|
Please scroll down for more information and pricing.
Four-Foot and Six-Foot Lighthouse Benches
Photo Shows Old-Growth Redwood
The Lighthouse benches are rated to 500 lbs, but can be reinforced (at no extra charge) to hold extra weight if necessary, without compromising any design features. Just let us know in the "Special Orders & Custom Requests" box in your shopping cart upon checkout. If you are planning to put your Lighthouse Bench in a moist sauna, spa or shower area, be sure to order it unfinished. (If it is stained with our standard outdoor sealant, the concentrated moisture may cause some leeching of the stain.)
Would you like to add an engraving to your bench? We can add a custom message for only $30. See example to the right, shown on our Ti Amo Memorial Bench. Just select the "Custom Engraving" option in the drop-down menu in your shopping cart. The engraving size translates to about 14 characters (letters and spaces) per foot. Lettering is black. We will center the engraving on the top board of the backrest or the seat of a backless bench, unless you specify elsewhere. Please let us know your instructions on placement and line break(s)— if not specified, they will be placed at shop's discretion.
 We can also inlay a memorial plaque from your local engraver— we don't order or make the plaques ourselves— for no additional charge. Once your plaque is made you can ship it to us at 33800 Annapolis Rd., Annapolis, CA 95412. Be sure to let us know during checkout in the "Special Instructions & Custom Requests" comment box that you will be sending a plaque so we know to hold your bench until it arrives. Then give us a call or use our contact form when you ship it so we can be on the lookout for it. We will then inlay your plaque in the center of the top backrest board, unless otherwise specified. If there is no backrest (backless bench), please let us know where you'd like the plaque placed.
|
| Dimensions: 18"H X 20"D. Trim-Board around the perimeter of each bench is 3 3/4"H and 3/4"W. The framing structure is made from fully two-inch thick boards; actual slats are 1 3/4" by 1 3/4".
|
Approx. Weight |
| 2 Foot Lighthouse Bench |
 |
 |
$510 |
 |
$440 |
 |
$390 |
20 lbs. |
| 3 Foot Lighthouse Bench |
 |
 |
$570 |
 |
$490 |
 |
$430 |
25 lbs. |
| 4 Foot Lighthouse Bench |
 |
 |
$630 |
 |
$540 |
 |
$480 |
30 lbs. |
| 5 Foot Lighthouse Bench |
 |
 |
$700 |
 |
$600 |
 |
$530 |
35 lbs. |
| 6 Foot Lighthouse Bench |
 |
 |
$760 |
 |
$650 |
 |
$570 |
40 lbs. |
| 8 Foot Lighthouse Bench |
 |
 |
$1010 |
 |
$860 |
 |
$760 |
50 lbs. |
Click on the images at right for more information.
Your furniture can be finished in one of five ways (select during checkout):
- Standard Semi-Transparent Sealant
If you want to keep the natural redwood tones— see images above. (Young-Growth will be stained to appear like Mature-Growth; click here for more information.)
- Unfinished
If you prefer your finish to fade to a "weathered look" quickly, or want to apply a custom stain.
- Off-White Oil-Based Primer
If you're going to paint in a light color. (We apply two coats.)
- Gray Oil-Based Primer
If you're going to paint in a darker color. (We apply two coats.)
- Wax Finish
If you plan to use your furniture indoors and would like to keep it looking great without sealant or paint.
- Click here to learn more about our finish options.
|